Power stations from the BLUETTI brand are no strangers on our website, because they certainly deserve some spotlight. Just like their latest model, the BLUETTI AC200P with massive 2000Wh power capacity. It is truly one of the most reliable portable power sources on the market. And we will take a closer look at its details and specifications in the few following paragraphs. Who knows, maybe you will realize, that you desperately need one for the summer.
Power Capacity of AC200P
You won’t easily run out of power capacity with this BLUETTI AC200P power station, as it has a 2000Wh power capacity. That’s a lot the power capacity . It is the equivalent of putting together twenty small portable power stations, that may only use a single AC outlet.
The use of a 2000Wh power capacity is great, but it’s also necessary. Because of the many ways that you’re able to use AC200P. That said, there are two amounts of power capacity, that you’ll be able to use when it comes to using this power station. As some parts of the power station use less power and therefore you get more power capacity to use as the conversion of the battery power is better.
Higher Power Capacity – Less Power Usage
Faster, or more power-oriented parts of using this power station will give you less power capacity to lose as there is more heat generated.
2000Wh x 1000 = 2,000,000 / 3.7V = 540,540mAh
Maybe you are more accustomed to using Mili-Amp Hour (mAh) to measure power capacity, rather than Watt Hours (Wh), as it’s used prominently with power banks. Then you can tell that 540,540mAh is a very VERY high power capacity.
This is a measure of power that you’ll be able to use when it comes to charging from the USB-A and USB-C Power Delivery port on this power station. However, the power station charging power may vary. As it’s able to charge at higher voltages when charging certain devices.
Overall, if all you’re doing with this power station is charging smartphones or tablets, while you’re out camping or on a road trip, then it may very well last the entirety of your trip. This is because most smartphones on the market now have around 4,000mAh battery capaciuty. So with a 540,540mAh power capacity you can get one hundred or more full charges for a single smartphone. Even splitting those full charges among two, three, or even four phones, still means that this power station can last for many days or a week of constant use.
Lower Capacity – Higher Power Usage
On the other hand, if you’re using higher power usage methods from this BLUETTI power station, then you’re going to be getting less power capacity to use. In this case, we’re calculating how much power capacity is available to use, when it comes to using a power output of 14.8V.
2000Wh x 1000 = 2,000,000 / 14.8V = 135,135mAh
This substantially lower power capacity to use comes from more heat being generated, and with power being transferred faster from one device to another, power is lost during the process of charging and powering. By using a 14.8V power output, you are losing a good amount of power to use, but at the same time, it’s still higher than most other power stations and you’re able to do a lot with it.
With a 135,135mAh power capacity when using the DC or USB-C Power Delivery ports, you’re still able to charge laptops to full power many times. If we’re assuming that, at most, a laptop has a 7,000mAh battery capacity, then this means that you can charge a laptop to full power about nineteen times. This means you can charge a laptop for more than two weeks straight without having to recharge the power station.
Even if you’re charging, or powering other devices with the other ports or AC outlets, there’s still a ton of power to go around that can last for about a week. Having a “Lower Capacity” isn’t exactly a thing in this case, because you still get so much from using the power station
Output Charging
The type of charging and powering features that a power station has been one of the most valuable parts of it. Sure, the power capacity is important because it dictates just how long you’re able to use the power station, but how you’re able to utilize this Bluetti AC200P power station is something that few others are capable of doing on the market. If any. There are a total of seven-way to use this AC200P and in all, you’re able to charge and power 17 devices at the same time. Sound impressive? It is.
USB-A & USB-C Power Delivery Port / Dual Wireless Charging
First, the basics. The AC200P gets the basics perfectly, and that’s because it has a total of four USB-A ports and a single USB-C Power Delivery port.
There are two pairs of USB-A ports, and each pair has a 5V/3.0A power output. This is a great charging speed for basically charging any smartphone or tablet out there. That said, none of the USB-A ports features Quick Charge, so you won’t be able to fast charge your Android smartphone with any of the USB-A ports.
Then there’s the USB-C Power Delivery port. When it comes to Power Delivery, most power banks tend to use either an 18W, 30W, or 45W Power Delivery charging speed. Those are good pretty good charging speeds, but this AC200P has a 60W charging speed, higher than what most power banks have.
At the same time, a 60W Power Delivery charging speed can charge most USB-C PD laptops at or near their max charging speed. For example, the MacBook Air has a 30W max charge rate, so this PD port can charge it at its max charging speed with the 60W PD port. The Lenovo Flex 5 laptop that I use is also able to charge at its max speed.
When it comes to charging smartphones, the Power Delivery port is also able to charge USB-C smartphones and iPhones at their max speed, too.
To add to the five charging ports, this power station even has two wireless charging pads at the top and this enables you to charge two Qi wireless charging smartphones at the top of the power station. The best part is that the two wireless charging pads have a combined 15W output, meaning that you’re able to fast charge a Samsung phone at 10W and charge another phone at the same time at 5W. Bluetti didn’t have to place wireless charging on this power station, and most power stations don’t have wireless charging in the first place. However, the fact that you’re able to charge your phone without a cable with this power station is incredible.
Two 12V/3.0A DC Ports (DC5521)
There are two 12V/3.0A DC ports on the AC200P, and overall, DC ports can be useful if you have something to charge or power them with. In this case, the 12V/3.0A DC ports are going to be most useful when it comes to charging laptops that also use a DC barrel charging port.
12V/10A DC Car Port
The 12V/10A DC port is the same port that you’re able to find in most vehicles, and in this case, you would use this DC port for powering appliances. The most common appliance that we can think of when it comes to using the DC carport is a portable air tire pressure pump. These pumps almost always have a DC cable that can be plugged into this 12V/10A carport.
12V/25A DC Outlet
One other DC port on this AC200P is the 12V/25A port, and this port has a ton of power and it’s mainly useful to power RV vehicles, and by doing so, it’s able to power quite a few appliances inside your RV.
6 AC Outlets with a Shared 2000W Power Output
The most impressive part of this Bluetti AC200P 2000Wh power station is the use of its six AC outlets. There are very few portable power stations on the market that use six AC outlets, with most of them using either one or two, max. The other great part is that the six AC outlets share a massive 2000W power output.
Gizchina News of the week
Six AC outlets that share a 2000W power output enables you to power six appliances at the same time. Meaning that you can have a Magic Bullet blender, a fridge, charge a laptop with a laptop charger, power a lamp, a mini fan, and a mini electric grill at the same time. All that no matter where you are with the AC200P. It truly makes this BLUETTI power station one of the best on the market.
Another thing to add is that each of the six AC outlets is three-prong plugs so you have a more free range of what you’re able to connect to the AC outlets.
Input Charging
The output of this AC200P is powerful and there are many options. On the same note, the input for recharging this power station is just as good, and that’s because you have five options to recharge the AC200P.
The two main methods of recharging the AC200P is the use of an AC or car adapter. The AC adapter is perfect for recharging the unit while you’re at home, while the car adapter is useful for recharging the unit when you’re driving.
The good thing is that the AC200P comes with the AC and car charger. The one other more accessible way of recharging is by using a Solar panel, but this unit does not come with Solar panels. However, the AC00 does come with a Solar panel adapter that you can use to plug into Solar panels.
The two other methods of recharging this power station are not the most common and are ones that you likely won’t be using but are always there to use. One would be using a Gasoline or Diesel generator to recharge the AC200P. The other would be using Lead Acid batteries to also recharge the unit.
Size and Weight
Before purchasing a portable power station it is important to acknowledge that it will be large and heavy. Portable power stations are not be held for a long duration of time and are more meant to be stored in case of an emergency or those places and times where you don’t have access to a stable source of power such as a wall outlet.
That’s the case for this AC200P power station as it has a length of 16.5 inches, a with of 15.2 inches, and a height of 11 inches. Most importantly the AC200P power stations weigh 57 pounds. It’s very heavy so be careful, when picking it up. Once again, this is not a power station that you can hold for a long time. It’s meant to stay in a single place, because of its larger size and heavyweight.
Functional Components
Even with all of its features, using the AC200P power station is quite easy. All the output ports are at the front of the unit other than the two wireless charging pads at the top. The two input ports for recharging the power stations can be found to the side.
Also, at the front is where you’ll find a touch LCD screen. From the screen, you’re able to control quite a few things within the power station. The first thing you’re able to see is how much remaining power capacity is there. You are also able to see how much power the power station is outputting.
You can also select for the AC200P to enter into special Power Saver mode. In Power Saver mode the AC200P turns off automatically, if it goes under a certain power output.
Structure and Material
The build quality of this BLUETTI AC200P power station is simply great. It’s on par with many of the other power stations that the brand has released. When all the ports are covered with their cover guards, it is even almost water-resistant. There isn’t much shock-resistance, but these power stations are built well enough. So you can place it into a trunk of a car and still not worry about it sliding and bumping around.
Tech
Since the power station is capable of outputting 2000W, it has a fan on the inside to keep things cool. If the power station is either 45° Celcius (113° Fahrenheit) or has an output greater than 250W or 1000W, then the fan is automatically turned on at low speed. On the other hand, if the power station is 50° Celcius (122° Fahrenheit) or over 1500W, then the fan speed is set to high automatically.
Reliability
Power stations are built to be reliable, and they’re more reliable than any power bank that you will purchase. BLUETTI AC200P power station is one of the most reliable power stations, that you can spend money on. There are very few power stations that make use of six AC outlets. On top of that you have four USB-A ports, 60W Power Delivery port and two wireless charging pads at the top.
You also get three types of DC ports that can prove useful for charging or powering certain devices and appliances. With all of these ways to use the AC200P and combining it with the massive 2000Wh power capacity, using this power station is like taking your home with you no matter where you are.
| | Bluetti AC200P Power Station Specs |
| Battery Type | LifePo4 Lithium-ion |
| Capacity | 2000Wh |
| Rated life cycle | 2500 |
| AC Inverter (Continuous) | 2000W |
| Solar Input | 30-145V, Max.25A/700W |
| Charge time | 3.5-4Hrs for AC, 3.5Hrs for Solar 9Hrs for Car |
| # of 110v outlets | 6 |
| # of 12V DC (Cigarette Lighter) | 1* (12v/10A, 13.5V,200W) 2* (12V/3A, 13.5V) |
| # of USB-C Ports | 1* PD60W |
| # of USB-A Ports | 4*5V/3A USB-A |
| # of Wireless Charging | 2* 15W |
| # of RV output | 1* (12V/25A,13.2V) |
| Weight | 57 lbs |
BLUETTI has already done a lot in the portable power station space. And they’re pushing what power stations are capable of with this AC200P. It has everything, that you would want a power station to feature. With its high power capacity, many, many charging and powering options, and innovative design. Like the use of a touch-screen for certain controls. It’s one of the best out there. And if you’re looking for a universal capable power station then the BLUETTI AC200P is it. Convinced already ? Then get yours right here.