The Chinese company Huawei has officially introduced the mid-range Enjoy 50 Pro smartphone running the Harmony OS operating system. Reception of pre-orders for the smartphone will begin on July 29.
Also, the Huawei Enjoy 50 Pro has a 6.7″ FHD + display with a resolution of 2388 × 1080 pixels, a refresh rate of 90 Hz and a touch layer response rate of 270 Hz. An 8-megapixel selfie camera is located in a small hole in the center at the top of the screen.
In addition, the rear camera of the Huawei Enjoy 50 Pro exist in a circular area. A 50-megapixel main sensor, a 2-megapixel macro unit and a 2-megapixel sensor for collecting information about the depth of the scene are in use. The fingerprint scanner is located on the side.
Huawei Enjoy 50 Pro released with SD 680 SoC and Mate 40 design
Additionally, the Huawei Enjoy 50 Pro runs the Qualcomm Snapdragon 680 processor. This chip contains eight Kryo 265 computing cores with a clock speed of up to 2.4 GHz, an Adreno 610 graphics accelerator and a Snapdragon X11 LTE modem. The amount of RAM is 8 GB, the capacity of the flash drive is 128 or 256 GB.
Gizchina News of the week
Also, Huawei Enjoy 50 Pro power is provided by a 5000 mAh rechargeable battery with support for 40 W charging. It takes approximately 30 minutes to charge the smartphone from 0% to 50%. Among other things, a Bluetooth 5.0 adapter, a 3.5 mm audio jack and an NFC controller are mentioned.
So, according to Yu Chengdong, CEO of Huawei Consumer Business Group, the number of HarmonyOS users has already exceeded 300 million.
Recall that in April 2022 it was reported about overcoming the milestone of 240 million users, in December 2021 – 220 million, in October – 150 million, and in September – 100 million.
In addition, yesterday, Huawei introduced the first devices based on HarmonyOS 3; the Huawei MatePad Pro 11 tablet and the new Huawei Watch 3 Pro.