Fixing a SSD That Is Not Recognized by Windows


Dealing with an SSD that Windows 11 can’t detect can be frustrating, especially if it holds crucial files. Whether your SSD is fresh or problematic, there are ways to recover your data and restore its functionality, even if Windows’ built-in troubleshooter fails. Check out our guide and learn how to fix the SSD Not Recognized issue.

Your approach depends on the SSD’s content:

  • New SSD or no critical files: You have more freedom to troubleshoot without risking data loss. Try adjusting settings or formatting.
  • Important files on SSD: Prioritize data recovery before attempting fixes like settings adjustments or formatting. These steps could otherwise corrupt files or lead to data loss.

Testing your SSD on a different PC

To troubleshoot, start by testing whether the issue lies with your PC or the SSD itself. Connect your SSD to a second or older PC, or borrow a friend’s computer to see if the SSD is recognized.

If the SSD appears on the second PC, the problem likely stems from your computer’s BIOS settings, Windows configurations, or physical connections. However, if the SSD isn’t detected on the second PC, the issue may reside with the SSD’s settings, software, or even hardware.

SSD not recognized

Another method involves using a known working secondary SSD on your PC. If this SSD is detected, it confirms that your PC’s connections are operating correctly. Conversely, if the second SSD isn’t recognized, your PC may be the root of the problem.

These tests will help you identify where the issue lies, enabling you to take appropriate actions to resolve the SSD detection problem effectively.

Check the Connections

If your SSD isn’t working or isn’t recognized, start by checking for loose cables or damaged connections. SSDs usually need two cables: one for data that connects to the motherboard, and another for power that comes from the power supply. If you’re using an M.2 SSD, it plugs directly into the motherboard.

Turn off and unplug your PC. Remove all cables connected to the SSD and motherboard. Use a dry paper towel to wipe the cables clean and check for damage like burns or scratches. Once cleaned and inspected, reconnect the cables securely and then turn on your computer.

If the SSD still isn’t found, try using a different data cable and plug it into another slot on the motherboard. You can also test with a different power cable from your power supply. For M.2 SSDs, remove the SSD and inspect both its connections and the motherboard for any signs of damage. Clean the M.2 slot to remove any dirt or debris that may affect connectivity.

Find your SSD in BIOS

If you’ve checked all connections and your SSD still isn’t detected, it’s time to see if your BIOS can find it. Getting into BIOS varies by motherboard, so there’s no one-size-fits-all guide.

To enter BIOS:

  1. Start your PC and press a specific key before the startup screen appears.
  2. The key varies by manufacturer and might show on the screen before startup. Common keys are Tab, Del, Esc, F2, F10, and F12.

Once in BIOS, go to the Startup or Boot tab. Look for boot options—they might be under Boot Priority or Boot Order. If your SSD shows up here, it’s likely a software issue, easier to fix. If not, it could be a tougher hardware issue.

Seeing if your SSD appears in BIOS helps figure out what’s wrong and guides your next steps.

Gizchina News of the week


Initializing SSD in Disk Management

If you bought a new SSD, there are high chance that you will need to initialize it before using it for the first time. To set up your new SSD for the first time on Windows:

  1. Press Windows + X, then choose Disk Management from the menu.
  2. If prompted, select the SSD from the list in Disk Management.
  3. Right-click on the SSD and choose Initialize Disk.
  4. Select either MBR (Master Boot Record) if your SSD is under 2TB, or GPT (GUID Partition Table) for SSDs larger than 2TB.
  5. Click OK to begin the initialization process for your SSD.

Once the initialization process is complete, your SSD should be ready to use.

Creating a Partition

If your SSD has been initialized but isn’t detected, you might need to create a partition on it for your computer to recognize it. Here’s how to allocate space to your new SSD after initialization:

  1. Press Windows + X, then select Disk Management from the menu.
  2. Locate your SSD in the list of drives. If it’s not visible, right-click on the area that represents your SSD and choose “Initialize Disk” (if not already done).
  3. Right-click on the unallocated space of your SSD and select “New Simple Volume.”
  4. Follow the on-screen prompts in the New Simple Volume Wizard. Specify the size of the partition you want to create.
  5. Assign a drive letter or path to the partition and choose a file system (usually NTFS).
  6. Complete the wizard and your SSD should now have a partition allocated to it, ready for use.

If everything goes well, you should now see your SSD in Disk Management and Computer via Windows Explorer.

Change the Drive Letter

If your SSD is new and all cables are functioning properly, changing its drive letter might resolve detection issues. Sometimes, a duplicate drive letter or an unrecognized label can prevent Windows from recognizing the SSD. Here’s how to change the drive letter:

  1. Press Windows + X, then select “Disk Management.”
  2. Locate your SSD in the list of drives.
  3. Right-click on the SSD and choose “Change Drive Letter and Paths.”
  4. Click “Change,” then select a new drive letter from the drop-down menu.
  5. Click OK to apply the changes.

Adjusting the drive letter can often resolve the SSD not being recognized. Assigning a new letter, when Windows fails to do it, allows the OS to detect and utilize your SSD effectively.

Format the SSD

Formatting your SSD should be a last resort when troubleshooting, especially if you’ve exhausted other options and don’t have critical data to lose. Be aware that formatting will erase all data on the drive.

To format your SSD:

  1. Press Windows + X, then select “Disk Management.”
  2. Find your SSD in the list of drives.
  3. Right-click on the SSD and choose “Format.”
  4. Follow the prompts in the Format Wizard to select the file system (usually NTFS), allocate unit size, and perform the format.

Remember, formatting will permanently delete all data on the SSD. Use this option only if necessary and after considering other troubleshooting steps.

Do I Need A New SSD?

Whether you need a new SSD depends on how old it is and whether troubleshooting has helped. If your SSD is old and troubleshooting hasn’t fixed it, you might want to get a new one.

If your SSD is new or recently bought and problems continue after troubleshooting, it’s likely defective. You should be able to return it for a new one or get a refund, especially if it’s under warranty. Check the warranty details. If your SSD has important documents or personal photos, avoid formatting it. Experts may say your data can’t be saved, but with the right tools and effort, you can often recover your information. In short, decide on a new SSD based on its age and how well troubleshooting went. Keep your important data safe if it’s on the SSD.

These are the steps to take if you’re trying to fix the SSD not recognized issue that does not appear. Good luck!

Disclaimer: We may be compensated by some of the companies whose products we talk about, but our articles and reviews are always our honest opinions. For more details, you can check out our editorial guidelines and learn about how we use affiliate links.

Source/VIA :
Previous Is Someone Phone Tracking You? Signs to Look Out For
Next Samsung Galaxy Z Flip 6 Images Exposed